GYEON Q² Can Coat EVO

Gyeon Can Coat is a very nice way to enter into the world of ceramics but at the same time don't mistake it for some kind of substandard solution, it really does pack a punch. It's nice and easy to work with, slick, glossy, repellent, and offers a bit of hardness to repel against those annoying watermarks, bug etching, and other contaminants.

Can Coat is worth the extra bit of work required to prep and apply it and makes future cleaning much easier thanks to its repellency.

As with all protection products, especially ceramic-based protection preparation is key. Do not apply in direct sunlight and on hot surfaces. Can Coat can be applied to paintwork, trim, wheels, metal, carbon fibre, or PPF/vinyl.

1. Ensure the surface is clean, dry, and decontaminated.
2. For best results, ensure the vehicle is polished.
3. Wipe the surfaces to be coated down with Gyeon Q2M Prep. This removes any oils that could be present on the paintwork and potentially prevents the coating from bonding properly.
4. Spray Can Coat onto the supplied microfibre and wipe a section of the paintwork until full gloss is achieved.
5. Flip the towel, or use a second towel to ensure all streaks and smears are removed.
6. If desired, a second coat can be added, but please allow a minimum of 1 hour between coats.
7. Finally, no matter if you applied one or multiple coats, allow 12 hours for the coating to fully cure without getting wet.
8. Try to avoid washing the vehicle for a minimum of 7 days.