Koch Chemie Colourlock Allround Textile Sealant ST0 01

Allround Textile Sealant is the first product released following the Koch Chemie and Colourlock merger. We knew it would be good as they are two brands that are very well respected and trusted for manufacturing excellent products.

Fabric sealants are always an excellent addition for your interior fabrics or convertible roof, making them highly water-repellent and very easy to clean, however, they usually have strong odours. This can make interior application a bit of a challenge, we found Allround Textile Sealant to have no odours and be much more pleasant to work with.

Shake the bottle well before use. Protect against frost and excessive heat. Do not apply to surfaces where slipperiness is undesirable Do not apply to displays or polycarbonates. Check for suitability and compatibility before use.

An application temperature between 10°C and 40°C is recommended.

1. Ensure the fabric is thoroughly clean and free of debris before application. Use a vacuum cleaner and clean with a suitable cleaner such as Koch Chemie Pol Star or Koch Chemie Mehrzweckreiniger. Allow to fully dry before application of the sealant.
2. Cover surrounding areas not to be sealed with masking tape and or dust sheet if covering a large area.
3. Apply the sealant to the surface evenly using a microfibre sponge to create a thin and even wet film.
4. Work the sealant into the fabric thoroughly with a crosswise motion and allow the product to dry.
5. Allow up to 24 hours to fully dry

Only gently clean the sealed surfaces after using Allround Textile Sealant. If the effect wears off, it can be refreshed by reapplying the product, as long as the textile is not heavily soiled.