CarPro Lift Snow Foam

There has been a shift in people's attitude towards snow foams and we like it. No longer are people scared of using a foam that isn't pH neutral and that is fine, like all products, if used correctly will pose no issues whatsoever.

The big bonus is a lot of these active, high-pH foams such as CarPro Lift offer loads of cleaning power whilst remaining safe. Lift also offers a thick blanket allowing for it to cling for a good amount of time, further maximising the cleaning ability. It rinses easily and leaves the surface incredibly clean and ready for contact wash.

Do not use in direct sunlight, ensure the surface is cool. Do not let the foam dry on the car.

1. Dilute Lift with water around 1:10 however this can be adjusted either way for a thicker foam / deeper clean or for a weaker, less dense foam if required.
2. Allow several minutes for the foam to dwell on the surface, however, be careful not to let the foam dry.
3. Finally, rinse the car thoroughly and proceed to wash with shampoo such as CarPro Reset.

CarPro Lift pH Level: Lift has a pH level of 12, however, don't let this put you off, that is neat. Once diluted it will become lower and is perfectly safe for use on waxes, sealants, and coatings.

Lift vs Descale: CarPro Descale is a decontamination shampoo first, designed for use in a bucket, but it can be applied via a snow foam lance. Lift is a dedicated snow foam with much more touchless cleaning power available.

Lift vs Reset: CarPro Reset is a pure car shampoo designed for bucket wash, Lift is a dedicated snow foam which will provide a touchless pre-wash.

CarPro Lift on Ceramic Coatings: Lift is perfectly safe for use on waxes, sealants, and ceramic coatings.